Common Choke Power Inductors

A horizontal common mode inductor is a type of inductor that is designed to suppress common mode noise in electronic circuits. It is called "horizontal" because the windings are laid out parallel to the circuit board, as opposed to being wound vertically. Common mode noise is a type of electromagnetic interference (EMI) that occurs when unwanted signals are present on both conductors of a transmission line. This can lead to problems such as data corruption, signal degradation, and even damage...

A horizontal common mode inductor is a type of inductor that is designed to suppress common mode noise in electronic circuits. It is called "horizontal" because the windings are laid out parallel to the circuit board, as opposed to being wound vertically. Common mode noise is a type of electromagnetic interference (EMI) that occurs when unwanted signals are present on both conductors of a transmission line. This can lead to problems such as data corruption, signal degradation, and even damage...

A three-phase common mode inductor is an inductor used in three-phase power systems to reduce common mode noise. Common mode noise is a type of electrical noise that occurs when there is a voltage difference between the ground and the neutral wire in a power system. This noise can cause interference with other electronic devices and can also damage sensitive equipment. The three-phase common mode inductor is designed to reduce the common mode noise by providing a high impedance path for the...

A vertical common mode inductive filter is a type of filter that is used to reduce common mode noise or interference in electrical circuits. Common mode noise refers to unwanted signals that are present in both the positive and negative lines of a circuit, and can cause problems such as electromagnetic interference (EMI) and radio frequency interference (RFI). The vertical common mode inductive filter is designed to block common mode noise by using inductors that are placed in series with the...

A vertical flat line common mode choke is a type of electronic component used in electronic circuits to filter out common mode noise. It consists of two coils wound on a magnetic core, with the windings arranged in a vertical flat line configuration. The choke is designed to block common mode noise, which is unwanted electrical noise that appears on both signal lines in a circuit. The vertical flat line configuration of the coils provides a high level of common mode rejection, as the magnetic...

A high power differential mode inductor is a type of inductor used in electronic circuits to filter out unwanted noise and interference. It is designed to handle high power levels and is used in applications where there is a large difference between the voltage levels in the circuit. Differential mode inductors are used to filter out high-frequency noise that is common to both the input and output of a circuit. They are typically used in power supplies, amplifiers, and other high-frequency...

The SQ series flat common mode inductor is a type of inductor that is designed to reduce electromagnetic interference (EMI) in electronic circuits.The flat shape of the inductor allows it to be mounted close to the circuit board, reducing the overall size of the circuit. The common mode inductor works by filtering out unwanted noise and interference that can cause signal distortion or data loss. It is made of high-quality magnetic materials that provide high inductance values and low...

A PFC (Power Factor Correction) inductor is an essential component in a photovoltaic power converter. It is used to correct the power factor of the converter and improve its efficiency. The inductor is typically placed between the input rectifier and the DC-DC converter. It helps to smooth out the input current waveform, reducing harmonic distortion and improving the power factor. A PFC inductor is designed to handle high currents and high frequencies. It is typically made of a...

A nanocrystalline choke is an inductor made of nanocrystalline material. Nanocrystalline materials are a type of magnetic material that has very small crystal grains (typically less than 100 nm in size) and high magnetic permeability. This makes them ideal for use in inductors and transformers, where high magnetic permeability is important for efficient energy transfer. Nanocrystalline chokes are used in a variety of applications, including power supplies, inverters, and motor drives. They are...

A FR-4 common choke is a type of inductor that is commonly used in electronic circuits to filter out unwanted noise and interference. It is made from a coil of wire wound around a magnetic core, and is typically designed to have a high impedance at the frequency of the noise or interference that needs to be filtered out. The FR-4 material refers to the type of fiberglass-reinforced epoxy laminate that is commonly used as a substrate for printed circuit boards, and is often used in the...

A switching power supply main transformer made with silicon steel sheet is a type of transformer that is designed to work with a switching power supply circuit. The transformer is constructed using laminated sheets of silicon steel, which are used to reduce the magnetic losses that occur during the transformer's operation. The silicon steel material is chosen because it has a low hysteresis loss and eddy current loss, which makes it ideal for use in high-frequency applications such as switching...

A power inductor is an electrical component that stores energy in a magnetic field when current flows through it. It is also known as a coil or choke. Power inductors are used in various electronic circuits to filter out unwanted high-frequency noise and to regulate voltage. They are commonly found in power supplies, DC-DC converters, and voltage regulators. Power inductors are designed to handle high current and are typically made of a core material such as ferrite or powdered iron, wrapped...

A high current switching power transformer is a type of transformer that is specifically designed to handle high current loads in switching power supply applications. The design of a high current switching power transformer is optimized for high frequency operation and low losses. The transformer core is made of high-permeability materials, such as ferrite or powdered iron, that can handle high magnetic flux densities without saturating. The windings are usually made of copper wire with a high...

The PQ3540 is a type of ferrite core transformer commonly used in new energy switching power supplies. It has a core size of 35mm x 40mm and is designed to handle high-frequency switching currents. The transformer is typically used in power supplies for renewable energy sources such as solar panels and wind turbines, as well as in electric vehicle charging stations and other applications that require efficient and reliable power conversion. The PQ3540 transformer is known for its high power...

The PQ3535 new energy switching power supply main transformer is a type of transformer used in power supply circuits for various electronic devices. It is designed to provide a high level of efficiency and reliability, while also minimizing the size and weight of the transformer itself. The PQ3535 transformer is typically used in applications such as LED lighting, solar power systems, and other renewable energy installations. It is characterized by its compact size, high power density, and low...

The PQ3230 new energy switching power supply main transformer is a type of transformer used in high-frequency switching power supplies for new energy applications such as solar power, wind power, and electric vehicles. It is designed to provide high efficiency and low losses, making it ideal for use in renewable energy systems where energy conservation is a key concern. The PQ3230 transformer is a core-type transformer, which means that the magnetic core is made of a high-permeability material...

The PQ3225 is a type of ferrite core transformer commonly used in switching power supplies. It is characterized by its small size and high power handling capability. The PQ3225 transformer is designed to operate at high frequencies, typically in the range of 20 kHz to 200 kHz, which allows it to efficiently convert the input voltage to the desired output voltage. The main function of the PQ3225 transformer is to step down the high voltage input from the AC power source to a lower voltage...

The PQ3225 is a type of transformer used in new energy switching power supplies. It is a compact, high-frequency transformer that is designed to handle high power levels and operate efficiently at high frequencies. The PQ3225 transformer is typically used in applications such as solar inverters, wind power systems, and electric vehicle charging stations, where high efficiency and reliability are critical. It is designed to provide high levels of isolation between the primary and secondary...

The PQ26 new energy switching power supply main transformer is a type of transformer used in power supply circuits. It is designed for use in high-frequency switching applications and is capable of handling high levels of power. The PQ26 transformer is typically used in applications such as LED lighting, industrial automation, and other electronic devices that require a stable and reliable power supply. It is characterized by its small size, high efficiency, and low noise, making it an ideal...

The PQ35 new energy switching power supply main transformer is a type of transformer that is used in power supply systems for converting electrical energy from one voltage level to another. It is designed for use in new energy applications such as solar and wind power systems, electric vehicles, and other renewable energy systems. The PQ35 transformer is a high-frequency transformer that operates at frequencies above 20 kHz. It is designed to handle high power levels and has a high efficiency...