Switching Power Supply Transformers

A three-phase common mode inductor is an inductor used in three-phase power systems to reduce common mode noise. Common mode noise is a type of electrical noise that occurs when there is a voltage difference between the ground and the neutral wire in a power system. This noise can cause interference with other electronic devices and can also damage sensitive equipment. The three-phase common mode inductor is designed to reduce the common mode noise by providing a high impedance path for the...

A high power differential mode inductor is a type of inductor used in electronic circuits to filter out unwanted noise and interference. It is designed to handle high power levels and is used in applications where there is a large difference between the voltage levels in the circuit. Differential mode inductors are used to filter out high-frequency noise that is common to both the input and output of a circuit. They are typically used in power supplies, amplifiers, and other high-frequency...

A PFC (Power Factor Correction) inductor is an essential component in a photovoltaic power converter. It is used to correct the power factor of the converter and improve its efficiency. The inductor is typically placed between the input rectifier and the DC-DC converter. It helps to smooth out the input current waveform, reducing harmonic distortion and improving the power factor. A PFC inductor is designed to handle high currents and high frequencies. It is typically made of a...

A switching power supply main transformer made with silicon steel sheet is a type of transformer that is designed to work with a switching power supply circuit. The transformer is constructed using laminated sheets of silicon steel, which are used to reduce the magnetic losses that occur during the transformer's operation. The silicon steel material is chosen because it has a low hysteresis loss and eddy current loss, which makes it ideal for use in high-frequency applications such as switching...

A power inductor is an electrical component that stores energy in a magnetic field when current flows through it. It is also known as a coil or choke. Power inductors are used in various electronic circuits to filter out unwanted high-frequency noise and to regulate voltage. They are commonly found in power supplies, DC-DC converters, and voltage regulators. Power inductors are designed to handle high current and are typically made of a core material such as ferrite or powdered iron, wrapped...

A low frequency transformer is a type of electrical transformer that operates at frequencies below 1000 Hz. These transformers are commonly used in power supply circuits, audio amplifiers, and other low-frequency applications. They are designed to transform electrical energy from one voltage level to another, while minimizing losses and maintaining high efficiency. Low frequency transformers are typically made with iron cores and copper winding, and are available in a variety of sizes and...

A high current switching power transformer is a type of transformer that is specifically designed to handle high current loads in switching power supply applications. The design of a high current switching power transformer is optimized for high frequency operation and low losses. The transformer core is made of high-permeability materials, such as ferrite or powdered iron, that can handle high magnetic flux densities without saturating. The windings are usually made of copper wire with a high...

The PQ5050 high-frequency transformer is a practical component for alternative energy projects. It's made to support and enhance performance in systems like solar inverters and wind turbines, and can be adjusted to fit various applications. transformer can be customized to your project's needs. Adjustments in inductance, voltage, and core materials ensure it matches your system's electrical requirements, which helps reduce energy loss and improves your project's overall efficiency. Quality is a...

The PQ3540 is a type of ferrite core transformer commonly used in new energy switching power supplies. It has a core size of 35mm x 40mm and is designed to handle high-frequency switching currents. The transformer is typically used in power supplies for renewable energy sources such as solar panels and wind turbines, as well as in electric vehicle charging stations and other applications that require efficient and reliable power conversion. The PQ3540 transformer is known for its high power...

The PQ3535 new energy switching power supply main transformer is a type of transformer used in power supply circuits for various electronic devices. It is designed to provide a high level of efficiency and reliability, while also minimizing the size and weight of the transformer itself. The PQ3535 transformer is typically used in applications such as LED lighting, solar power systems, and other renewable energy installations. It is characterized by its compact size, high power density, and low...

The PQ3230 new energy switching power supply main transformer is a type of transformer used in high-frequency switching power supplies for new energy applications such as solar power, wind power, and electric vehicles. It is designed to provide high efficiency and low losses, making it ideal for use in renewable energy systems where energy conservation is a key concern. The PQ3230 transformer is a core-type transformer, which means that the magnetic core is made of a high-permeability material...

The PQ3225 is a type of ferrite core transformer commonly used in switching power supplies. It is characterized by its small size and high power handling capability. The PQ3225 transformer is designed to operate at high frequencies, typically in the range of 20 kHz to 200 kHz, which allows it to efficiently convert the input voltage to the desired output voltage. The main function of the PQ3225 transformer is to step down the high voltage input from the AC power source to a lower voltage...

The PQ3225 is a type of transformer used in new energy switching power supplies. It is a compact, high-frequency transformer that is designed to handle high power levels and operate efficiently at high frequencies. The PQ3225 transformer is typically used in applications such as solar inverters, wind power systems, and electric vehicle charging stations, where high efficiency and reliability are critical. It is designed to provide high levels of isolation between the primary and secondary...

The PQ26 new energy switching power supply main transformer is a type of transformer used in power supply circuits. It is designed for use in high-frequency switching applications and is capable of handling high levels of power. The PQ26 transformer is typically used in applications such as LED lighting, industrial automation, and other electronic devices that require a stable and reliable power supply. It is characterized by its small size, high efficiency, and low noise, making it an ideal...

The PQ35 new energy switching power supply main transformer is a type of transformer that is used in power supply systems for converting electrical energy from one voltage level to another. It is designed for use in new energy applications such as solar and wind power systems, electric vehicles, and other renewable energy systems. The PQ35 transformer is a high-frequency transformer that operates at frequencies above 20 kHz. It is designed to handle high power levels and has a high efficiency...

The ETD34 is a straightforward, dual-output transformer that efficiently supplies power in electronics where two different voltages are required. It's a practical choice for use in: Industrial Systems: These might include control panels that need varied power for different components. The ETD34 offers two voltages, which helps keep the design simple. Telecom Equipment: Gear like modems and routers that need more than one voltage level can use the ETD34 to save space and simplify...

The ETD54 High Power Dual Output Switching Power Transformer is a type of transformer that is commonly used in power supply applications. It is designed to convert high voltage AC power into low voltage DC power, which is used to power electronic devices. The transformer has two output windings, each capable of delivering a different voltage and current level. This makes it a versatile component that can be used in a wide range of applications. The ETD54 transformer is designed to handle high...

The EP10 transformer is a smart choice for its balance of small size, power efficiency, and versatile use, especially when you're looking to power a range of electronic devices without using a lot of space or spending a lot. The benefits of using the EP10 include: Size: The square plastic housing is compact, helping to fit more technology into smaller devices. Portable Gadgets: Its small size is also a bonus for portable electronics, such as external batteries and smartphone accessories, where...

The ETD29 triple output switching power transformer is a type of transformer that is used in power supply circuits to convert high voltage, low current AC power to low voltage, high current DC power. It has three separate outputs, each with its own winding and voltage rating. The transformer is designed to operate at high frequencies, typically between 20 kHz and 200 kHz, which allows for smaller and more efficient power supplies. The ETD29 triple output switching power transformer is commonly...

The EQ34 new energy switching power supply main transformer is a key component in the power supply unit. It is responsible for transforming the input voltage to the required output voltage for the electronic device it is powering. The EQ34 transformer is designed for use in high-efficiency switching power supplies, which are commonly used in electronic devices such as computers, televisions, and audio equipment. It is designed to handle high-frequency switching currents and provide reliable and...