LLC Transformer

A low frequency transformer is a type of transformer that is designed to operate at frequencies below 400HZ. These transformers are commonly used in power supplies, audio equipment, and other applications where low frequency operation is required. The design of a low frequency transformer is similar to that of a high frequency transformer, with the primary and secondary windings wrapped around a magnetic core. However, the core material used in low frequency transformers is typically larger and...

A switching power supply main transformer made with silicon steel sheet is a type of transformer that is designed to work with a switching power supply circuit. The transformer is constructed using laminated sheets of silicon steel, which are used to reduce the magnetic losses that occur during the transformer's operation. The silicon steel material is chosen because it has a low hysteresis loss and eddy current loss, which makes it ideal for use in high-frequency applications such as switching...

A low frequency transformer is a type of electrical transformer that operates at frequencies below 1000 Hz. These transformers are commonly used in power supply circuits, audio amplifiers, and other low-frequency applications. They are designed to transform electrical energy from one voltage level to another, while minimizing losses and maintaining high efficiency. Low frequency transformers are typically made with iron cores and copper winding, and are available in a variety of sizes and...

A current transformer (CT) is a type of transformer that is used to measure alternating current (AC) in electrical power systems. It is designed to provide an isolated and reduced current signal that is proportional to the primary current flowing through it. The primary current is the current that is being measured, and the secondary current is the current that is produced by the CURRENTCURRENT TRANSFORMER and is used by the measuring instrument or device. CURRENT TRANSFORMER are commonly used...

A high current switching power transformer is a type of transformer that is specifically designed to handle high current loads in switching power supply applications. The design of a high current switching power transformer is optimized for high frequency operation and low losses. The transformer core is made of high-permeability materials, such as ferrite or powdered iron, that can handle high magnetic flux densities without saturating. The windings are usually made of copper wire with a high...

The RM type high frequency transformer is a type of transformer that is commonly used in electronic circuits. It is a small, compact transformer that has a rectangular shape with a center-tapped primary winding and one or more secondary windings. The RM series transformers are typically used in low-power applications, such as in power supplies, audio amplifiers, and other electronic devices. They are designed to provide isolation between the input and output circuits, and to step up or step...

The PQ5050 high-frequency transformer is a practical component for alternative energy projects. It's made to support and enhance performance in systems like solar inverters and wind turbines, and can be adjusted to fit various applications. transformer can be customized to your project's needs. Adjustments in inductance, voltage, and core materials ensure it matches your system's electrical requirements, which helps reduce energy loss and improves your project's overall efficiency. Quality is a...

The PQ3540 is a type of ferrite core transformer commonly used in new energy switching power supplies. It has a core size of 35mm x 40mm and is designed to handle high-frequency switching currents. The transformer is typically used in power supplies for renewable energy sources such as solar panels and wind turbines, as well as in electric vehicle charging stations and other applications that require efficient and reliable power conversion. The PQ3540 transformer is known for its high power...

The PQ3535 new energy switching power supply main transformer is a type of transformer used in power supply circuits for various electronic devices. It is designed to provide a high level of efficiency and reliability, while also minimizing the size and weight of the transformer itself. The PQ3535 transformer is typically used in applications such as LED lighting, solar power systems, and other renewable energy installations. It is characterized by its compact size, high power density, and low...

The PQ3230 new energy switching power supply main transformer is a type of transformer used in high-frequency switching power supplies for new energy applications such as solar power, wind power, and electric vehicles. It is designed to provide high efficiency and low losses, making it ideal for use in renewable energy systems where energy conservation is a key concern. The PQ3230 transformer is a core-type transformer, which means that the magnetic core is made of a high-permeability material...

A switching power supply main transformer is a key component in a switching power supply circuit. It is responsible for transforming the input voltage to the desired output voltage, and also for providing electrical isolation between the input and output circuits. The design and specifications of a switching power supply main transformer depend on various factors such as the input voltage range, output voltage and current requirements, efficiency, and size constraints. Generally, these...

The PQ3225 is a type of ferrite core transformer commonly used in switching power supplies. It is characterized by its small size and high power handling capability. The PQ3225 transformer is designed to operate at high frequencies, typically in the range of 20 kHz to 200 kHz, which allows it to efficiently convert the input voltage to the desired output voltage. The main function of the PQ3225 transformer is to step down the high voltage input from the AC power source to a lower voltage...

The PQ3225 is a type of transformer used in new energy switching power supplies. It is a compact, high-frequency transformer that is designed to handle high power levels and operate efficiently at high frequencies. The PQ3225 transformer is typically used in applications such as solar inverters, wind power systems, and electric vehicle charging stations, where high efficiency and reliability are critical. It is designed to provide high levels of isolation between the primary and secondary...

The PQ26 new energy switching power supply main transformer is a type of transformer used in power supply circuits. It is designed for use in high-frequency switching applications and is capable of handling high levels of power. The PQ26 transformer is typically used in applications such as LED lighting, industrial automation, and other electronic devices that require a stable and reliable power supply. It is characterized by its small size, high efficiency, and low noise, making it an ideal...

The EEL25's small stature belies its significant power, offering a reliable solution for electronic projects with high-frequency demands. This transformer achieves a balance between performance and size, favored for its adaptability across multiple device types, such as: Switching Power Supplies: Adaptable in regulating power, the EEL25 is instrumental in devices that require the efficient transformation of DC to AC power at high frequencies. Its compact footprint allows designers to free up...

New energy transformers are designed to meet the increasing demand for energy efficiency and renewable energy integration in power systems. They are typically used in power generation, transmission, and distribution systems to transform and distribute electrical power from renewable sources such as solar, wind, and hydroelectric power. PQ35 is a standard for the power quality of distribution transformers. It specifies the maximum allowable voltage distortion and harmonic content in the output...

The PQ35 new energy switching power supply main transformer is a type of transformer that is used in power supply systems for converting electrical energy from one voltage level to another. It is designed for use in new energy applications such as solar and wind power systems, electric vehicles, and other renewable energy systems. The PQ35 transformer is a high-frequency transformer that operates at frequencies above 20 kHz. It is designed to handle high power levels and has a high efficiency...

A miniature current transformer is a type of transformer that is designed to measure electrical current in a circuit. It is typically smaller in size compared to traditional current transformers, making it ideal for use in small and compact electronic devices. The miniature current transformer is composed of a primary winding and a secondary winding, which are wound around a magnetic core. When an electrical current flows through the primary winding, it induces a current in the secondary...

A current transformer (CT) is an electrical device that is used to measure the current in a circuit. It is a type of transformer that is designed to produce a current in its secondary winding that is proportional to the current flowing in its primary winding. The primary winding of a CT is connected in series with the circuit being measured, while the secondary winding is connected to a measuring device, such as an ammeter or a wattmeter. CTs are commonly used in power systems to measure high...

An Plastic Square LLC Transformer is a type of transformer that uses an LLC resonant circuit to regulate the voltage output. The LLC resonant circuit consists of an inductor (L), a capacitor (C), and another inductor (L), arranged in a series-parallel configuration. The LLC transformer is designed to operate at high frequencies, typically in the range of 100 kHz to 1 MHz, and is used in power supplies and other applications where high efficiency and low noise are important. The LLC transformer...